Identifying Cables

• Year, make and model of machine
• Carburetor
• Throttle type
• Special routing
• Handle bar modifications
• Describe cable specifications in sufficient detail for us to build the cable you want
• Send cable for us to duplicate (indicate modifications if needed in +/- size)
• Specify housing type (Armor Coat^™, Argent^™, Blackout^™, black vinyl O.E. replacement or T2^™)

Motion Pro Housing Options
(click on your desired housing for more information)

Custom Cable Glossary (definitions)

Drawings

Please include the following information if you send a drawing:

• Housing length (with in-line adjuster fully turned in if cable has in-line adjuster)
• Free length
• Inner cable diameter
• Inner cable bottom fitting (ball, barrel, dimensions)
• Inner cable top fitting (ball, barrel,dimensions)
• Housing outer diameter
• Housing in-line adjuster (y/n) Note:If yes, length of usable travel and specify location of in line adjuster (distance from top of housing)
• Housing bottom fitting type - straight or angled (if angled specify degree of bend) and thread diameter and pitch
• Housing bottom fitting type: straight or angled (if angled specify degree of bend) and thread diameter and pitch

Metric Fittings

	Nipple (wire end-fitting)		Threaded Adjuster with Nuts (housing end-fitting)
	Barrel (wire end-fitting)		Threaded Adjuster with Nuts (housing end-fitting)
	Ball (wire end-fitting)		Threaded Adjuster with Nuts (housing end-fitting)
	Pear A (wire end-fitting)		Threaded Elbow with In-Line Adjuster (housing end-fitting)
	Pear B (wire end-fitting)		Elbow (housing end-fitting)
	Clevis (wire crimp fitting)		Elbow with Step-End (housing end-fitting)
	Clevis (wire non-crimp fitting)		Elbow with Threaded Adjuster and Nuts (housing end-fitting)
	Housing End Cap (end-fitting)		In-Line Adjuster
	Stud (wire end-fitting)		Accordion Boot
	Step Cap (housing end-fitting)

V-Twin Fittings

	Eyelet (wire end-fitting)		Speedometer Nut
	Nipple (wire end-fitting)		Flanged Housing End for Speedo Nut
	Barrel (wire end-fitting)		Flanged Housing End for Speedo Nut
	Ball (wire end-fitting)		Step Cap (housing end-fitting)
	In-Line Adjuster		90° Elbow Assembly with In-Line Adjuster and Snap-In Type Fitting
	Threaded Adjuster (housing end-fitting)

Pricing

The pricing listed below is standard pricing for one-of-a-kind cables that are 79 inches or less (overall housing length). If you are referencing a Motion Pro part number and the part number being referenced is more expensive then the standard custom cable cost, pricing will be based on the part number cost plus 10%.

Throttle and Choke Cables

Black and Grey Housing

Pricing for throttle and choke cables with black or grey housing (includes Blackout^™).
Note: Blackout^™ cables are for H-D^® applications ONLY.

Argent^™ Housing

Pricing for throttle cables in Argent^™ housing Note: Argent^™ cables are for H-D^® applications ONLY.

Armor Coat^™ Housing

Pricing for throttle and choke cables with AC^™ (Armor Coat^™) housing
Note: Available for most applications.

Speedo / Tach Cables

Speedo / Tach Cable

Pricing for speedo and tach cables with black or grey housing (includes Blackout^™).
Note: Blackout^™ cables are for H-D^® applications ONLY.

Clutch and Brake (non-hydraulic) Cables

H-D^® and American V-Twin ONLY

Metric Clutch and Brake Cables - Sport Bike / Dirt Bike / ATV / Metric Cruisers