Armor Rim Strip Tape, 11-0061 & 11-0062
.jpg)
Step 1
CLEAN YOUR RIM (do not use WD-40 or other like products that leave an oily residue as this will prevent the tape from sticking correctly)
Step 2
Peel paper backing off the tape just past the hole on the short end.
Step 3
Align the hole in the tape with the Schrader valve hole on the rim, and press down the exposed adhesive section of the tape.
Step 4
Continue by simultaneously pulling off the paper backing and firmly seating the rim tape over the spoke nipples in the center of the rim until the two ends overlap.
Step 5
Cut the hole for the rim lock with a hobby knife once the tape has been fully installed.
USE CAUTION WITH THE HOBBY KNIFE TO AVOID INJURING YOURSELF.
.jpg)
We use cookies to offer you a better experience and analyze site traffic. By continuing to use this website, you consent to the use of cookies in accordance with our cookie policy.